EPower DC to DC battery charger is smaller than our most compact AC Battery Charger. Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output. DC M6 screw terminals that will allow for large battery cable connection between all sources. A dedicated Maximum Power Point (MPPT) solar regulator. The same battery algorithms as included in our AC mains ePOWER battery charger.GEL, AGM, Flooded, Lithium and the ability to create a full custom profile. Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W. 40A output up to 40+°C with thermo controlled fan cooling. Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage. Temperature sensor included in charger for more accurate battery charging. The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. During normal operation the ePOWER DC2DC+ Battery Charger will do a full charge cycle to float stage on the house battery bank with ability to choose either GEL, AGM, Flooded, Custom Programmable or Lithium. Once float stage is reached the charger transitions to a power supply mode to support any on-board DC loads. The ePOWER DC2DC+ Battery Charger is a fully automatic, set and forget charger. It is designed to quickly and accurately recharge your deep cycle batteries utilising charger algorithms that help to maximise the life of your specialised deep cycle batteries. The ePOWER DC2DC+ Battery Charger features multistage smart charging technology that enables the charger to be connected to your battery bank permanently. With the input of multiple sources, you can be assured of charging your batteries whenever underway; or when the sun is shining on your solar array. As dictated by battery manufacturers recommendations, deep cycle batteries require a multistage charge sequence for perfect, fast and accurate charging. The Enerdrive ePOWER DC2DC+ smart charger delivers three primary charge stages. Stage 1 Bulk or Boost charge; The battery is charged at full rated output current of the charger until the battery reaches its final charging voltage, known as its absorption voltage. In this step, around 80% of the battery is recovered as fast as possible. Stage 2 Absorption Charge; With the charger voltage held steady, the remaining 20% is replaced with the charger allowing the current to taper off as the battery approaches full charge. Stage 3 Float; Finally, in the float stage the charger voltage is lowered and held at a constant and safe predetermined level. This prevents the battery from being overcharged, yet allows the charger to supply enough current to make up for the self-discharge losses of the battery, while supporting any additional loads connected to the battery (such as DC lighting and refrigerators). This stage allows for the charger to be used as a DC power supply.
The ePOWER DC2DC+ Battery Charger will regulate its output based on the loads connected to your battery bank. This function is important to maintain the life of your battery bank as some battery chargers mistake loads for discharge and continue to keep the batteries in the bulk or absorption stage for extended periods of time, which will damage the battery bank. The ePOWER DC2DC+ Battery Charger has two methods of load based regulation to ensure your battery charger transitions to float when it should do so.
Included standard with all ePOWER Battery Chargers. Enerdrive ePOWER DC2DC+ Battery Charger 40A ePower DC to DC battery charger is smaller than our most compact AC Battery Charger. Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output DC M6 screw terminals that will allow for large battery cable connection between all sources A dedicated Maximum Power Point (MPPT) solar regulator The same battery algorithms as included in our AC mains ePOWER battery charger. GEL, AGM, Flooded, Lithium and the ability to create a full custom profile Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W 40A output up to 40+°C with thermo controlled fan cooling Fully programmable LCD display to show which source is charging the battery along with charger sta. Trade your product to the latest model for a fraction of the new price.
With most units now unserviceable by the user, the cost of repairs mount up. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This Enerdrive product is not intended for commercial use.Misuse includes wiring or connecting to improper polarity power sources. If you are experiencing any problems with your unit, please contact our customer service department at Enerdrive before returning product to retail store. If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturers option. A unit may be replaced with a new or reconditioned unit of the same or comparable design. Solar 4 RVs incorporating Solar 4 Boats and Solar 4 Industry is a multi-award-winning company that is acknowledged as the leader in lightweight and flexible solar systems for mobile applications including RVs, marine and off-grid equipment. The family business operates across Australia, New Zealand and the South Pacific, with a showroom and warehouse located at Unit 13, 5 Kelletts Road, Rowville, Victoria, Australia. The item "Enerdrive DC 2 DC / MPPT 12V-40A Battery Charger/MPPT" is in sale since Friday, May 1, 2020. This item is in the category "Home & Garden\Building Materials & DIY\Electrical Supplies\Alternative Energy Supplies\Alternative Energy Chargers & Inverters".
The seller is "solar4rvs" and is located in Rowville. This item can be shipped worldwide.